CAN bus transceiver module CAN communication module CAN transceiver 3.3V/5-30V power supply optional

Hardware foundation: CAN bus work requires two data cables, RX and TX, which are input bus and output bus.Generally, the MCU or ARM class control requires a driving chip (this is similar to the UART-485 interface). The commonly used CAN chips are mainly: SN65VHD23X, PCA82C250T, etc. This module CAN chip model is: SIT65HVD23X (SIT)/SN65HVD23X (TI), large shipments, stable performance, and industrial -grade TVS protection; default shipments with 120R mid -end resistance, if not needed, can be manually welded.

Features:

1. From the 3.3V single power supply to the power supply operation;

2. Compliance with ISO 11898-2 standard:

3. Bullet pin ESD protection exceeds ± 5KV human model (HBM);

4. Allow a bus to connect up to 120 nodes;

5. Adjustable driver conversion time can improve radiation performance;

6. Low -current standby mode: 650mA (typical value);

7. Designed for data rates up to 1Mbps;

8. Heat Broken Protection;

9. Open road fault safety design;

10. For the hairless pulse of the heat plug -in application, electricity and power loss protection