817 optocoupler 2/4/8 voltage isolation plate voltage control Rotary module drives photoelectric isolation module

In actual work, this module is used when you encounter a need to isolate and the voltage conversion.

The interface of 3.3V or 5V control 3.6 --- 24V voltage levels can be achieved. After the control end is turned on, the control end will also be turned on.

Optical isolation is strong anti -interference ability.You can drive high -power triode, MOS tubes, etc. to drive high voltage drivers, or you can directly drive a small power 24V relay to work.

If it is a pulse signal, please note that the limit of 817 is below 4KHz. Please do not use this module with a control signal greater than 4KHz. It will work abnormal.

Module parameters:

1. Drive end signal voltage: 3.6-24V

2. The output end voltage range: 3.6-30V (the specific situation of the output current vision but not 10mA, the total power and current are inversely proportional)

3. You can realize whether the output end is high potential output or pull the output through the jump cap.

4. 817 above the board of the board are independent, which can achieve different voltage control, etc.

5: Board size: length: 48mm; width: 38mm; long -side hole distance: 42mm; wide edge hole distance: 32mm

Product Attributes
Brand	Other/Other
Output Voltage	0.1

Unlimited Blocks, Tabs or Accordions with any HTML content can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc. You can indicate any criteria via the advanced product assignment mechanism and only those products matching your criteria will display the modules.

Also, any module can be selectively activated per device (desktop/tablet/phone), customer login status and other criteria. Imagine the possibilities.