RF broadband amplifier low noise release LNA (0.1-2000MHz gain 30DB) spot

The amplifier has the advantages of wide frequency range, high gain, and low noise coefficients. It can be used for various radio frequency receiving front -end, increasing communication distance 2:
3: Large -scale short -wave, frequency adjustment broadcast, remote control receiver, cable TV signal amplifier and other places that require low noise and small signal radio frequency amplification
4: Scope of use
5: Use safety
Product application
The amplifier has the advantages of wide frequency range, high gain, low noise coefficient, etc. It can be used for various radio frequency receiving front -end, increasing communication distance! Large -scale short -wave, frequency adjustment broadcast, remote control receiver, cable TV signal amplifier, etc. require low noise, small signal radio frequencyEnlarged place
L technical indicator
1) Working frequency: 0.1-2000MHz
2) Work voltage: 9-12V (suitable for battery power supply)
3) Work current: 27mA
4) Extraction gain: 32DB (typical value)
F = 0.1MHz, gain = 32db
F = 500MHz gain = 32db
F = 1000MHz gain = 32db
F = 1500MHz gain = 32db
F = 2000MHz gain = 32db
F = 2500MHz gain = 30db
F = 3000MHz gain = 29db
5) Maximum output: 13DBM (20MW)
6) System impedance: 50 ohm
7) Connector model: SMA-K (internal thread, outer thread, inner hole)
8) Size: 25*33mm (excluding connector)
9) Product weight: 5.9g
3 How to use
Rfin: Enter signal amplification
RFOUT: Output magnification signal
VCC: Positive power supply (suitable for battery)
GND: Negative power supply