DC motor drive board 2 motor driving module DRV8833 motor driver module small volume

parameter:

Size: 18.5*16mm

Input voltage: 3 ——10v

Single H bridge output current: 1.5A, which can drive 2 DC deceleration motors.

Built -in overcurrent protection, short -circuit protection, low -pressure atresia and overheating protection.With low power sleep mode.

Uses: DC motors and 4 -line steps can be driven into the motor.

Instructions for use:

ULT low -level is sleep mode (need to disconnect the J2 short -connected solder point behind the module)

OUT1,0UT2 is 1 H bridge, and the corresponding control is IN1, IN2.

OUT3,0UT4 is the second H bridge, and the corresponding control is IN3, IN4.

EEP is not used by default to protect the output.

VCC input 3 to 10V.

GND ground.

Product Attributes
Brand	Other/Other

Unlimited Blocks, Tabs or Accordions with any HTML content can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc. You can indicate any criteria via the advanced product assignment mechanism and only those products matching your criteria will display the modules.

Also, any module can be selectively activated per device (desktop/tablet/phone), customer login status and other criteria. Imagine the possibilities.