5V relay module KY-019 1 relay module

The relay coil driving voltage is 5V, and the input control level can also be a module within 5V.

1. Output drive capacity: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A;

2. Easy to use, the output of each group is simple 3 line structure, and the 6 output wiring columns are reserved;

3. Enter the connection to the single -chip IO port or digital circuit, enter high -level relay suction, and input low -level relay release;

4. The working voltage is 5V, and the suction current is about 70mA per road.

5. Full -patch component, the most reasonable driving circuit design, uses 8050 triode drive relay;

6. There are fixed screw holes for easy installation. The size of the circuit board is 1.8cm*4.0cm*1.9cm, weighs 15g;

Simple test description: The module input and output electrical insulation. After the corresponding correct voltage is provided, you only need to connect the high level (such as the short circuit with VCC) on the input exclusive needle.(Such as short -circuit with GND) Relay relay does not move.

Product Attributes
Brand	none
Model	5V relay module KY-019

Unlimited Blocks, Tabs or Accordions with any HTML content can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc. You can indicate any criteria via the advanced product assignment mechanism and only those products matching your criteria will display the modules.

Also, any module can be selectively activated per device (desktop/tablet/phone), customer login status and other criteria. Imagine the possibilities.