450W high -power DC motor driver module controller can be full PWM positive reverse brake 12V24V36V

Product introduction:

This driver has a built -in hardware dead area control function.The motor is more secure, stable and reliable when running a large current!There is also an output function of the underwriting lock!The actual measurement continues to output 450W (36V 15A).One penny and one penny!Welcome to test!

This driver can not only simulate control, but also directly accept the single -chip machine IO driver!This system can not only simulate control, but also have good protection functions.

(1) The imported full bridge driver chip+low -pass internal resistance 110A NMOS driver pipe can be easily achieved by the electrometer and the forward and reverse.

(2) The working frequency of the chip is as high as 600kHz, which is easy to solve the problem of MC33886 and VNH3SP30 to make the motor noise and fever. At the same time, the driving capacity has improved significantly, and the response speed is fast.The performance of this driver is not comparable

(3) Two PWM inputs, the duty cycle can be 0-100%, which cannot be achieved by general drivers.With instantaneous braking ability and help you easily control the speed of speed.

(4) A working voltage of 10.5-36V that can adapt to a wider adaptation, suitable for robotics or car model competitions that are suitable for lithium batteries.

(5) Built -in logical buffer isolation circuit.Support PLC and various types of 3V or 5V single -chip microcomputer IO port directly control, and can also control the motor brakes and positive and reverse by simulating voltage input.

(6) The control is very simple and easy to use. It only needs to connect 3 input cables to control the motor to develop and front and reverse.

(7) Time hardware control in the dead area of ​​the chip can effectively protect the H bridge when the motor is frequently replaced, and avoid direct damage, so that the software programming is simpler.

(8) The chip operating frequency is as high as 600kHz. It is suitable for hollow -up motor drive. The noise is very small, and the heating is low.