Single -button switch module Single -key dual -stabilized 10A current load width voltage low power consumption

The two models are wide -voltage versions and low power consumption versions. This series of modules can implement the function of power -off at the same way as the self -lock switch through the touch switch. MAX can support the load of the switch 10A current.In the state, its power consumption is low. The XL-10AL power consumption version can support it at 3.5-5.5V voltage. The static power consumption is about 300NA under the disconnection state, and the XL-10AH wide voltage version can support 4.5-26V wide width.The range voltage, the static power consumption is about 1.3UA in the disconnection state.

The excellent performance of the module covers the working voltage and working current required for most DC loads. The small volume design will not occupy too much space for your device. For the key part, if you want to use other styles of keys, you can also use the wires to pass the wire.Connect the key button of various styles to our switch control board.

Model wide voltage version/low power version

Working voltage: Low-power version: 3.5-5.4V; wide voltage version 4.5-26V

Static power consumption: (there are deviations in sample tests but not large)

Low -power version: 300NA (5V voltage measurement); wide voltage version: 1.3UA (12V voltage measurement)

Load current: Low -power version: 10A (5V voltage test 30 minutes); wide voltage version: 10A (12V voltage test 30 minutes)

Volume low power consumption version: 130mv (5V 10A measurement); wide voltage version: 120mv (12V10A voltage measurement)

1. Regarding the load current, the low -power version can be long -distance running at 5V, but it will be hot, but under the condition of about 25 ° C at room temperature, pass a 30 -minute long -distance running test. It is not recommended to run 10A large current and low voltage.It is easy to burn the module when the heat is large. The current current of the wide voltage version is not recommended to run a long run below 7V.

2. In the case of small current, the module input voltage is basically equal to the output voltage. When the 10A large current can reach 170mV, it is difficult to avoid, so you have to accept this phenomenon.

3. Do not use your hands or other objects with less electrostatic or less resistance when using the module.

4. Regarding your own buttons, you can connect your connection line to your keys to your button,