PAJ7620U2 gesture recognition sensor module built -in 9 gesture recognition/IIC interface/intelligent identification

Link: https://pan.baidu.com/s/1sbkrabyb2-nryzj3bownfa? Pwd = 1234

Extract code: 1234

Product introduction:
This product is based on the PAJ7620U2 gesture. It can identify the gestures of 9 different directions, including the upper, lower left, right, front, rear, clockwise, counterclockwise, swinging.The gesture recognition module uses the II2C interface, and the corresponding Arduino library function can be programmed. The signal returned by the gesture recognition module can be used as a control signal received by the robot to achieve control of the robot.The built -in identification algorithm can only be liberated from the stiff keys.Gesture recognition sensors can be used for non -contact control scenarios such as non -contact mouse, smart home, car click device control, robotic interaction, etc.

Product characteristics:
1.9 gesture recognition

2. Interface: IIC interface communication protocol
3. Work voltage: 3.3V-5.0V
4. The gesture speed is 60 °/s to 600 °/s under normal mode, and the game mode is 60 °/s to 1200 °/s
5. Environmental light immunity: <100K LUX
6. Work current: 3MA-10MA
7. Module size: 20mm*15mm

Interface definition:

1.GND: The input port of the power supply negative electrode input
2.vcc: Power positive input port
3.SCL: I2C clock port
4.SDA: I2C data port
5.INT: Interrupt Output
Wiring spacing: 2.54mm (two -hole circular distance)