PDC004-PD deception device PD23.0 rpm DC DC trigger rotation wiring QC4 charging penbook 912 1520V

Product introduction:

What is a deception device? What is its function now that many power supply supports fast charge output and the output voltage can be adjusted. Generally, 4V to 12V or 20V output range, which is specifically designed according to the power supply.But the default output is 5V, so how to make the power output output the voltage you want? This requires how much voltage output you need.How to tell the power supply the voltage you want? This requires the use of deceptions. How can the deception device tell the power supply? This requires them to have a common language, that is, the protocol, the common protocols are QC and PD, etc.

Applicable products: monitor, router, computer, fan heat, refrigerator, etc.The PDC004 uses a hardware PD recognition chip, and its identification logic is: bait trigger a fixed voltage.However, if the voltage to be seduced is not obtained, the voltage will be applied to the next gear.For example: For a 15V product PDC004, if your PD power supply is only 12V, or if there is no 15V, the next level is 12V, the bait will apply for the next level 12V.PD bait has strict communication formats.It will not trick higher voltage, and it will not increase or reduce voltage output without voltage.It cannot change the power, voltage and current of the power supply.

There are two versions of the module and 4 voltage

15V, 20V version: short jump line 20V, open road 15V

09V, 12V version: short jump line 12V, open road 09V

Product characteristics and parameters:

1. The Typec interface, the current loss is small.

2. 8 -bit processor, low power consumption, not fever.

3. Output voltage 9V/12V/20V optional, 4.2V-20V voltage can be fixed.

4. Port C can pass 5A current.

5, 23*12mm ultra -small volume, reserved the positioning slot.

6. Bring a deception indicator.When the protocol handshake was successfully light up.