IP2368 two -way high -power fast charging module charging treasure circuit board kit PD100W lifting voltage fast charge

The two -way C -port of the product can only be connected to unidirectional appliances or chargers, such as charging heads, mobile phones, and other electrical appliances.The module of the two -way two -way C -port C -port linked in two -way C portal may cause frequent switching between modules and cannot be recognized, and severe damage may be severely damaged.

Size: 60*40*3.6mm

Continuous working current: 18A overcharge: 4.235V ± 0.025V

Instant current: 30A over -charging voltage: 4.190.05V

Charging voltage: 16.8-17V overlapping voltage: 2.8+0.08V

Charging current: 1-10A over-discharge unlocking voltage: 3.0+0.1V

Balanced start voltage: 4.190.05V

Product information

Product name IP2368 two -way 100W fast charge module_

Product master control IP2368

Power supply voltage 4 string lithium battery (can modify resistance support

2-6 Lithium battery or iron phosphate battery

)，要求电池组放电能力>5A, the battery pack must be used with a protective board

Size 48*34*10mm

The center of the hole is 43.5*28.5mm (4 holes are M2 screws)

Weight 20g

Has the function of two -way lifting and booming

The module has the function of two -way lifting voltage, and it can output fixed 5V or 20V in both battery voltage changes.It should be noted that 100W must have a 20V charging voltage. If the 12V output is maximum, it can only reach 3A current, which is 36W.(For details, refer to the following fast charge test table picture)

Support almost all fast charge protocols on the market

IP2368 full protocol 100W fast charge output, the output not only supports laptops, but also tolerate almost all mobile phone fast charge protocol fast charge protocols.

Modify the battery parameter description

IP2368 supports 2/3/4/5/6 section of the series connected batteries.The voltage can be set to: 4.15V/4.2V/4.3V/4.35V/4.4V. The full voltage of lithium iron phosphate batteries can be set to: 3.5V/3.55V/3.6V/3.65V/3.7V.

Specific modification method:

R2 suspended = ordinary lithium battery R2 short connection = lithium iron phosphate battery

R7 Set the number of battery string: 6.2K = 2 string 91k = 3 string 13k = 4 string 18K = 5 string 27k = 6 string

R5 Set the battery capacity: as shown below