XL6009 DC-DC boost module power module output can be adjusted over LM2577 4A current

6009 is a high -performance boost (BOOST) module of a 4A switch current.The module uses the XL6009E1 of the second -generation high -frequency switch technology as the core chip, and its performance far exceeds the LM2577 of the first -generation technology.The cost of XL6009 boost module is lower and the performance is more outstanding, and the LM2577 module is about to be eliminated.

● Ultra -wide input voltage 3V ~ 32V, the best working voltage range is 5 ~ 32V;

● Ultra -wide output voltage 5V ~ 45V;

● Built -in 4A high -efficiency MOSFET switch tube, making the efficiency up to 94%; (LM2577 current is only 3A)

● The ultra -high switching frequency is 400kHz, which can achieve very good results with a small -capacity filter capacitor. The ripples are smaller and the volume is smaller.(LM2577 frequency is only 50kHz)

Model specification

6009 boost module

Module nature

Non -isolation voltage (boost)

Rectification method

Non -synchronous rectification

Input

3V ~ 32V

Output

5V ~ 45V

Input current

4A (maximum), empty load 18mA (5V input, 8V output, empty load less than 18mA. The higher the voltage, the larger the air load.)

Conversion efficiency

(The larger the pressure difference, the lower the efficiency)

Switching frequency

400kHz

Output ripple

50MV (the higher the voltage, the larger the current, the larger the ripple)

Load adjustment rate

± 0.5%

Voltage adjustment

± 0.5%

Working temperature

-40 ℃ ~ +85 ℃

Appearance

43mm * 21mm * 14mm (length * width * height)

The output voltage range: DC 4V to 45V voltage can be adjusted continuously, and the maximum output current of high efficiency (maximum 96%) is 4A.

Advantages: choose double -sided thick high -quality PCB board, all use imported patch aluminum electrolytic capacitors, high Q value high -power inductance.In addition, each plate has undergone strict technical tests, and all of them are packaged using an independent antistatic protective bag after all testing.

Size: 43mm * 21mm * 14mm (long * width * height) (including potentiometer) Taobao on -Taobao components are the smallest!It is more convenient for customers to install various shells and better fixing.

In+ input the positive electrode IN-input negative pole!

OUT+output positive electrode out-output negative electrode

Test comparison sample reference:

Enter 5V output 12V 0.8A 9.6W

Input 7.4V output 12V 1.5A 18W

Input 12V output 15V 2A 30W

Input 12V output 16V 2A 32W

Input 12V output 18V 1.6A 28.8W

Input 12V output 19V 1.5A 28.5W

Input 12V output 24V 1 A 24W
Input 3V output 12V 0.4A 4.8W

Note:
※ This module has higher conversion efficiency compared to the LM2577 triode promotion method

※ This module is a adjustable boost module, which can be adjusted by adjusting the precision multi -circle potentiometer on the module
To change the output voltage.The highest output voltage is 45V.Rap the pressure in the past, rotate the pressure against time.

※ GND (input negative) indicated on the module, in+(input positive), GND (output negative), out+(output positive)

※ Work temperature:: Industrial grade (-45 ° C ~ +85 ° C) (the ambient temperature exceeds 40 degrees, please reduce power use, or strengthen heat dissipation)