Industrial-grade DC antihypertensive module 5V/12V/24V/6A 8A stabilization voltage voltage voltage voltage voltage voltage voltage voltage voltage voltage voltage voltage voltage voltage voltage voltage voltage voltage voltage high-power high power

Kind tips

This product is a high -power antihypertensive module. Input is anti -anti -connection. It is recommended to use the voltage within 38V. 6A can sustain 6A output in a good heat dissipation environment. It is not recommended to exceed 5A in normal use current.6A (limited board size leads to a limited heat dissipation area), and the module is the form of antihypertensive to ensure that the input and output voltage difference is more than 1V.

7-38v input

Maximum 6A/8A current output

1MA static current

Up to 95%conversion efficiency

210kHz frequency low ripple

Enter anti -connection protection

Short -circuit protection

Input and output TVS protection

Bring input fuse

Support soft start

Integrated temperature protection

-40 ° C to +85 ° C

Definition of module wiring.

IN+: Module power supply 7-38V Input positive electrode (input must be greater than the output voltage) IN-: Module input negative electrode (pass output negative pole)

OUT+: Module output positive pole

OUT-: Module output negative electrode (through input negative electrode)

Precautions

The product input should be greater than the output voltage.

It is best to disconnect the power when the wiring.

The wiring cannot be too detailed, ensuring that the wire can withstand the corresponding current,

Sensory loads should be protected to avoid excessive reverse electromotives beyond the scope of chip tolerance.

The closer the current, the closer the current.The greater the fever, the greater the use of the module, and the more pay attention to heat dissipation.The current module above 4A will be relatively hot. The 6A continuous output current is not recommended to exceed 5A, unless it adds additional heat dissipation.

When using a problem, contact customer service must cooperate with customer service to provide wiring pictures, use videos, etc., and do not accept only text information.