Brand: OEM
Model: ULYX1142
This module is a boost switch power supply with a high -power power density.A variety of voltage outputs (5V, 9V, 12V, 15V) are configured by default, and can be converted to the corresponding voltage output with only welding corresponding jumping points.The theoretical conversion rate ZUI can reach..
$7.00
Brand: OEM
Model: ULIW1183
Link: https://pan.baidu.com/s/1ugmk7mntyyww6xqhyvj29g?pwd=1234
Extract code: 1234
This product has a digital interface, which is a very simple pulse density modulation and output
High sensitivity can be integrated with electronic equipment, and it is not vulnerable to interference from the extern..
$4.85
Brand: OEM
Model: ULBZ1390
FreeScale "S MPR121QR2. The MPR121 is a Capacitive Touch Sensor Controller Driven by I2C Interface. The Chip Can Control up to Twelve Indiction, As well as a simulated thirteenth electrop. The mpr121 Also Features Eight Led Driving Pins. WHEN the PINS AreNot configured as electrodes, they may be use..
$0.70
Brand: OEM
Model: ULKS1641
http://yunpan.taobao.com/s/2LCJMP64S5PMPU-6500 module (three-axis gyroscope+ three-axis acceleration) Module Model: GY-6500 chip: MPU-6500 power supply: 3-5V (internal low voltage difference voltage voltage voltage voltage voltage voltage voltage voltage voltage) Communication method: Standard IIC/S..
$1.09
Brand: OEM
Model: ULKC1596
MPU9250 299DOF Nine -axis/9 -axis gesture acceleration gyroscopy guidelines needle magnetic field sensor
MPU-9250 module (three-axis gyroscope + three-axis acceleration + three-axis magnetic field)
Document network disk copy webpage download: http://pan.baidu.com/s/1nu67w6l
Module model: GY-9250
..
$7.50
Brand: OEM
Model: ULMR1537
Features
1. Size: 32mm x22mm x30mm long*width*height
2. Main chips: LM393, MQ135 gas sensing probe
3. Work voltage: DC 5V
Fourth, characteristics:
1. Have a signal output indicator indicator;
2. Double -road signal output (analog output and TTL level output);
3. The valid signal of the TTL ou..
$1.04
Brand: OEM
Model: ULCY1467
Introduction to mq-2 sensor:
The gas-sensitive material used in the MQ-2 gas sensor is a tin dioxide (SNO2) with a lower conductivity in the clean air.When the sensor is in the environment where the sensor is located, the motor rate of the sensor increases with the increase in the concentration of ..
$0.97
Brand: OEM
Model: ULKT1500
Introduction to mq-4 sensors:The gas-sensitive material used by the MQ-4 gas sensor is a tin dioxide (SNO2) with a lower conductivity in the clean air.When the sensor is in the environment where the sensor is located, the motor rate of the sensor increases with the increase in the concentration of g..
$0.95
Brand: OEM
Model: ULYG1208
Introduction to mq-5 sensors:The gas-sensitive material used by the MQ-5 gas sensor is a tin dioxide (SNO2) with a lower conductivity in the clean air.When the sensor is in the environment where the sensor is located, the motor rate of the sensor increases with the increase in the concentration of g..
$0.97
Brand: OEM
Model: ULLA1483
Introduction to mq-6 sensors:The gas-sensitive material used in the MQ-6 gas sensor is a tin dioxide (SNO2) with a lower conducting rate in the clean air.When the sensor is in the environment where the sensor is located, the motor rate of the sensor increases with the increase in the concentration o..
$0.94
Brand: OEM
Model: ULWL1509
Module application:Carbon dioxide detection devices for family and environment.Suitable for detection of carbon monoxide, gas, etc.Module characteristics:1. Using high -quality double -faced design, with power supply and TTL signal output indication;2. With DO switch signal (TTL) output and AO analo..
$110.50
Brand: OEM
Model: ULCV1459
Introduction to mq-8 sensors:The gas-sensitive material used in the MQ-8 gas sensor is a tin dioxide (SNO2) with a lower conducting rate in the clean air.When the sensor is in the environment where the sensor is located, the motor rate of the sensor increases with the increase in the concentration o..
$0.95