Brand: OEM
Model: ULDS1473
Information http://pan.baidu.com/s/1O6OK03K
1. Functional characteristics:
Product size: 50*26*15mm (excluding propeller)
Paddle diameter: 75mm
Working voltage: 5V
The L9110 driver can control the installation holes in front and backward, compatible with the rudder of the steering gear to contr..
$1.03
Brand: OEM
Model: ULJF1490
Information download: http://pan.baidu.com/s/1qwadjha
One module description
1 Double L9110S chip motor driver
2 Module power supply voltage: 2.5-12V
3 The suitable motor range: between 2.5V-12V of the motor, the maximum working current is 0.8A. The current smart car voltage and current on the m..
$0.38
Brand: OEM
Model: ULML1453
Name: button moduleSize: 11*22mmColor: red keycapVoltage: 3.5, 5VOutput: Digital level (press the high level, release low level)Interface: Arduino 3P interface s v gPlatform: Arduino, single -chip microcomputer, ARM, raspberry school
Delivery list
1. 1 key module (with keycap) 1 (keycap red and bl..
$0.20
Brand: OEM
Model: ULCK1151
Note: The default charging current is 200mA. If you need other charging current, please modify the RS1 resistor by yourself
CN3768 module related parameters and settings
Input voltage: 15-24VDC overcharge: 14.80VDC Fu charge voltage: 13.55VDC charging current: 4AMAX (set through RS1 on the board) ..
$7.00
Brand: OEM
Model: ULWP1268
4. Common electronic symbol code Chinese and British comparison as follows: as follows: as follows:
A.VCC: Power supply voltage positive electrode, circuit power supply voltage (voltage is usually 12V or 24V))
B.On/OFF, on, EN, on_bl, etc.: The switching foot, the switch signal pin (the voltage ra..
$2.75
Brand: OEM
Model: ULFE1382
Product name: LED miniature constant voltage lighting device product model: JW-MNTG-V5.0 Power supply voltage: DC DC 3.7V-24V applicable output voltage: equal to the input terminal voltage 4A (v*l = p) loadPower standby power consumption: 0 standby power consumption work type: constant voltage non -..
$1.62
Brand: OEM
Model: ULPD1582
LED light hand tuning knob light bar lights to control the brightness adjustment controllerYou can adjust the 12V constant current LED lamp beads and 12V-24V constant voltage LED lamp bead lamp with lamp barProduct introduction:With automatic memory functionLighting range: 0-3%-no pole dimmingInput ..
$1.49
Brand: OEM
Model: ULID1045
Technical parameters:
Size: 56*21*11mmColor: red yellow and greenLED: 5mm *3Brightness: ordinary brightnessVoltage: 5VInput: Digital signal outputInterface: Solid controlPlatform: RDUINO, 51 single -chip microcomputer..
$0.24
Brand: OEM
Model: ULMW1008
Since the optimization project's subsequent chip is changed to MU packaging, it is fearful
Compared with other versions of RDUino, the independent USB-Serial conversion chip is used, and Leonardo innovatively uses a single chip solution.Only a piece of ATMEGA32U4 is used to achieve USB communicatio..
$5.50